No Sew Cuben Fiber Double End Stuff Sack

Posted by Dutch on Oct 10th 2023

Project Overview

Skill Level	Estimated Time	Estimated Cost
Beginner	25 Minutes	$

Materials and Tools

Materials Needed:	Tools Needed:
18″ x 16″ Dyneema® Composite	Scissors
2 Mini Cord Locks	Ruler/Tape Measure
4 Ft Drawcord	Utility Knife
50″ Dyneema® Composite Adhesive
8″ Dyneema® Composite Tape

You can purchase the full kit from us here.

Step 1: Layout fabric flat on the table with the longer sides at the top and bottom. Step 2: Make a 1 ¼ inch fold from both sides and make a crease. You will now fold the corners in like the pictures show to make room for your draw cord. Step 3: Place a piece of adhesive on one side with now channel and peel off the white backing. Step 4: Roll the stuff sack adhere one side to the other making sure to get a flat taped seam. Step 5: Thread draw cord through channels and add cordlocks. Step 6: Reinforce near the draw cord holes with a 4 inch piece of the cuben fiber tape.